Surface Modification of Polyimide Aerogel by Thermoplastic Polyurethane for Enhanced Mechanical Strength and Thermal Insulation Performance.

Abstract

Polyimide (PI) aerogel is a good thermal insulation material with the highest temperature resistance in practical application. But the mechanical strength of PI aerogels prepared by freeze-drying or thermoimide methods is weak. In this research, TPU was selected as an aging solution to solve the problem of the low mechanical strength of PI aerogel prepared by the freeze-drying method. Previous work has certified that the coupling of PI and thermoplastic polyurethane (TPU) can enhance the mechanical strength of PI aerogel to a certain extent due to the flexibility of TPU. But excessive TPU will change the PI structure in the cross-linking process and decrease the mechanical strength of the aerogel. Thus, a new kind of PI gel modification method was provided by using TPU as an aging solution, and the mechanical strength of PI aerogel is improved to 3.06 MPa. Furthermore, the shrinkage, specific surface area, waterproof angle, and thermal conductivity all show good performance, thus enabling PI aerogel to be used in many aspects. Specially, the method is simple and can be used to prepare some other high-strength aerogels.