Abstract
This paper studies the superplasticity of conventional sheets of Ti-1V-4Al-3Mo (α + β) alloy. The flow behavior was investigated in a temperature range of 775 °C–900 °C and a constant strain rate range of 2 × 10−4–5 × 10−3 s−1 via uniaxial tensile tests. The microstructure evolution during the superplastic deformation was analyzed. The results revealed that, the flow behavior of Ti-1V-4Al-3Mo (α + β) alloy is characterized by strain softening phenomena. The experimental stress-strain data were used to build a power law constitutive model. A processing map, which shows the safe and unsafe regions of deformation, was also constructed for the studied alloy. The optimal deformation regime was attained at a temperature of 875 °C and strain rate of 1 × 10−3 s−1 which provided a β phase fraction of 52%. Equiaxed fine-grained α and β structure with size of 2–3 μm as well as dislocation activity inside the α-grains were identified in the optimum deformation regime.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
