SUMMERTIME CONCENTRATIONS AND EMISSIONS OF HYDROGEN SULFIDE AT A MECHANICALLY VENTILATED SWINE FINISHING BUILDING

Abstract

Hydrogen sulfide (H2S) concentration and emission at a modern mechanically ventilated swine finishing buildingwith a deep pit were continuously measured for three summer months. Ventilation rates, temperatures, and pig inventory inthe building were also continuously measured or recorded. A total of 88 d of valid data were obtained between 26 June and25 September, during which the average daily mean (ADM) ambient temperature was 21.8
C. The test began with 887, 19kgpigs in the building and ended with 874, 83kg pigs. Hydrogen sulfide was measured with a sulfur dioxide (SO2) analyzerequipped with a thermal oxidizer that converted H2S to SO2. Building ventilation rates were determined by continuouslymonitoring exhaust fan operation and differential static pressure. Daily mean building H2S concentrations ranged from 38to 536 ppb. The ADM building concentration (average of three locations) was 173  21 ppb (mean  95% confidence interval).The maximum concentration, averaged over 7 or 12min sampling periods, was 1,624 ppb. The 25 th , 50 th (median), and 75 thpercentile values were 413, 527, and 662 g/d for daily mean building H2S emission and 4.4, 5.8, and 12.4 g d 1 AU 1 (animalunit = 500 kg live mass present in the building) for daily mean specific emission, respectively. These H2S emissions were muchgreater than emissions measured or estimated in previous studies. Based on daily means, H2S concentration was inverselyproportional (P < 0.05) to ventilation rate (r = 0.68), whereas building H2S emission was influenced somewhat (P < 0.05)by building temperature (r = 0.29) and ventilation rate (r = 0.23).