Abstract
Effects of different glass/ceramic weight ratio on the physics and dielectric properties of Al2O3–B2O3–SiO2 (ABS) glass/Al2O3 ceramic composites were investigated. The results show that when glass/ceramic = 50:50 (mass fraction), the composite had the excellent comprehensive properties. Then the lower softening temperature CaO–B2O3–SiO2 (CBS) glass was added to the ABS glass as sintering flux on this composite. When the CBS glass content was 2 wt%, the composites showed good properties: er = 4.98, tanδ = 3.59 × 10−3 (which was 10 % lower than sample without CBS glass), and the flexural strength was 154.77 MPa (which was 16.2 % higher than the sample without CBS glass).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Materials Science: Materials in Electronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
