Abstract
Adsorption refrigeration is considered a green refrigeration technology that can be driven by a low-grade heat source to generate cooling power. However, the large bulk of adsorption chillers can limit its use especially automobiles. The size of the adsorption chiller is a very important consideration for applying in the automobile. The new type of compact adsorption chiller applied in the automobile was proposed corresponding with the specification of the automobile installation, and was about 40L by volume in this paper. A vacuum valve was used to increase the adsorption chiller size considerably. Thus, the new adsorption chiller has four pieces of vapor valves instead of vacuum valves, as well as two pieces of adsorbers, an evaporator, and a condenser. The vapor valve was controlled by the pressure difference at both sides. The prototype adsorption chiller was manufactured and evaluated for its cooling power and coefficient of performance by testing the inlet and outlet temperatures of the evaporator, flow rate of chilled water, and cycled time. The maximum cooling power was approximately 1.5kW at a driving temperature of 368K and a cycle time of 90s.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.