Abstract
Dissimilar metal joining of aluminium alloys to steel is generally difficult to be in practical use because of a formation of brittle intermetallic Fe–Al compound (IMC) at the interface of the joint. The authors have been researching in order to minimize the thickness of this brittle IMC in order to get excellent joint strength and have found that the formation of this brittle IMC is regionally prevented by using the advanced hot-dip aluminized steel sheet and by adopting suitable joining conditions. In particular, this paper focuses on the mechanism of creating this IMC-free region in the case of MIG-braze welding and the results obtained are as follows. (1) The creation of IMC-free region is initiated as the first process by the dissolution of the τ5 phase (Fe–Al–Si) in the aluminized layer into the weld metal, and temperatures of more than 886 K for dissolution during MIG-braze welding and the use of filler metal for dilution of Fe and Si in τ5 phase have significant effects. (2) In the second process, the diffusion between aluminium-alloy weld metal and base steel is restricted by AlN on the surface thin layer of the base steel which existed under 908 K temperature conditions during MIG-braze welding.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
