Abstract
Based on the artificial pollution tests, the effects of pollution and high altitude on the flashover performance of short samples of five kinds of UHV/EHV dc composite long rod insulators are analyzed. The exponent characterizing the influence of salt deposit density on the flashover voltage is related with the profile and the material of the insulator shed. The values of the samples' exponents vary between 0.24 and 0.30, which are smaller than those of porcelain or glass cap-and-pin insulators, namely, the influence of the pollution on the composite long rod insulators is less, relatively. Thus, the composite insulators have certain advantages in severe pollution regions. The best ratio of the leakage distance to the arcing distance is about 3.35. The exponent characterizing the influence of air pressure on the flashover voltage is related with the profile and the material of the insulator shed and the pollution severity, the values of the samples' exponents vary between 0.6 and 0.8, which are larger than those of porcelain or glass cap-and-pin insulators. Therefore, the dc composite insulator used in high altitude regions should have enough arcing distance. Based on the test results, if insulator sample Type E is selected for the plusmn800 kV UHV dc transmission lines, the basic arcing distance should be no less than 8.16 m and the basic leakage distance no less than 30.2 m.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Dielectrics and Electrical Insulation
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
