Abstract
In this study, a series of “Epoxy-Clay-PbO” nanocomposites under the name of ECPNCs were prepared by the molding method, and their physico-mechanical properties were investigated by different techniques. Focus of the work, was on the shielding ability of the ECPNCs for the gamma rays, emitted from Ir-192, Cs-137 and Co-60 with a wide range of energy. Scanning electron microscopy, and X-ray diffractometry demonstrated that clay platelets were fully exfoliated, and the PbO particles were homogenously distributed in the polymeric matrix. Thermo-gravimetric analysis and standard tensile tests revealed that PbO content has an “increasing/decreasing” effect on “thermal stability/mechanical strength” of the nanocomposites. Gamma shielding experiments showed that efficacy of ECPNCs containing 30 wt% PbO was 47% better than that of concrete. Experimental attenuation data were confirmed by theoretical calculations, so that the maximum difference between them was 14.1%. Furthermore, a correlation was developed between PbO content of the ECPNCs and their mass attenuation coefficient for all gamma sources.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
