Abstract
Four kinds of different fillers are selected to investigate effects of simultaneous nitrification and denitrification by biofilm process in simulated situ bioremediation in laboratory scale for Taihu Lake. Water temperature and filling rate are both investigated to optimize nitrogen removal effects at the water temperature of 30°C, 20°C, 10°C and the filling rate of 30%, 50%, 70%, respectively. Under the conditions of 30°C water temperature and 70% filling rate, nitrogen removal effects of filler 1# is best, nitrogen removal efficiency of simultaneous nitrification and denitrification (SND) is 95.44%, nitrogen removal effects of filler 3# is worst, its SND removal efficiency is 79.30%. Moreover, the surface of filler 1# and filler 2# is rough enough to have a hydrophilia for the growth of microorganisms, compare with filler 3# and filler 4#. Thus, the filler 1# and filler 2# could remove more TN and protect polluted surface water, water quality is promoted from class V to class III.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
