Abstract
In order to further improve the control efficiency of urban intersections, this paper took overlapping phase of the traffic flow as the optimization object, and put forward the dynamic optimization and control algorithm of overlapping phase of the traffic flow at intersection. This algorithm based on the compatibility relation of traffic flow, built the overlapping phase set of traffic flow, according to the switching structure of overlapping phase of the traffic flow, established the intersection benefit function, the traffic flow was dynamically selected to form the overlapping phase according to the minimum queue delay, the timing of the overlapping phase was further optimized with the minimum queue delay as the optimization objective, so as to realize the dynamic optimization and control of the overlapping phase of traffic flow. Finally, the intersection of Huang Shan road and Tian Zhi road in Hefei was tested. The experimental result showed that, after using the algorithm of this paper, the average delay and stop were greatly reduced compared with the method of the fixed-time control and the actuated control when the traffic flow was unevenly distributed and fluctuated at intersection.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.