Study on defect imaging technology of optical elements based on micro-Raman spectroscopy.

Abstract

An optical element defect detection imaging method based on micro-Raman spectroscopy is proposed to achieve high-precision imaging of optical element defects and their distribution. The detection precision of the system is immediately reflected in the imaging quality. The sharpness value of the mapping images is calculated using the Sum of Modulus of Gray Difference function. The selection of the Raman peak is an important step, and when a borosilicate glass sample with standard defects is measured for verification, it is found that the Raman peak light intensity changes at -37 and 28cm-1. When these two peaks were used for 2D mapping, obvious defect contours can be obtained, while the light intensity at other sites could not be used for imaging, and remained essentially constant. Through the detection of laser burning defects, new peaks appear at the burned defect location that could be used for imaging, and the burning defect area can be clearly distinguished from the non-burning area. By changing the laser burning conditions, the Raman shift changes, which verifies that there is a certain correlation between the laser burning degree and the Raman shift, which also provides a basis for 2D mapping imaging of defect detection.