Abstract
The acidizing and fracturing waste fluid in a wellsite in northern Shaanxi was treated by catalytic oxidation and flocculation precipitation. It investigated the effect of different coagulants and their dosage and the wastewater pH on coagulation precipitation. As for chemical oxidation experiment, it investigated the effect of oxidant dosage and reaction time on its treatment effect. The results showed that when 30% hydrogen peroxide (volume percentage) was added at the dosage of 0.3% and oxidized for 50 min, the pH was adjusted to 7.5 and 350 mg/L polyaluminum chloride (PAC) and 4 mg/L polyacrylamide were added (PAM); after processing the waste liquid, total iron, chemical oxygen demand (COD), chromaticity, and average corrosion rate were reduced from 252.75 mg/L, 3427.50 mg/L, 624.15°, and 0.1226 mm/a to 0.12 mg/L, 275.18 mg/L, 125° and 0.0217 mm/a, respectively; effective removal of iron and color, reduced COD, and controlled corrosion was achieved.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
