Abstract
Aluminum array holes were prepared by casting method which was carried out by using stainless steel wires coated with graphite coating as hole core. It has been verified by analyzing that because of the molten metal filling, ability was mainly affected by metallostatic pressure, surface tension, and melt viscosity. In this experiment, the array hole with a regular arrangement, round shape, and uniform diameter can be acquired under the condition that center spacing of adjacent hole core be greater than the diameter of the hole core. And the average diameter of array holes was about 0.55 mm and center spacing of adjacent hole was about 2.95 mm, there were almost no defects on the specimen.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: The International Journal of Advanced Manufacturing Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
