Abstract
Abstract The non-isothermal crystallization kinetics with heating rates ranging from 10 K s-1to 80 K s-1and the isothermal crystallization kinetics during annealing from the glass transition temperature to the crystallization onset temperature of a Zr57Cu15.4Ni12.6Al10Nb5 amorphous alloy were studied in detail using X-ray diffraction and differential scanning calorimetry. During non-isothermal crystallization, it is more difficult to nucleate than to grow, and the crystallization resistance increases first and then decreases. During isothermal crystallization of the alloy from 713- 728 K, there are two exothermic peaks corresponding to a diffusion-controlled growth process with decreasing nucleation rate and increasing nucleation rate. From 733- 748 K, only one exothermic peak appears, and the growth process is controlled by the interface with decreasing nucleation rate. Isothermal crystallization is a process in which the crystallization resistance increases. The resistance of isothermal crystallization is less than that of non-isothermal crystallization.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.