Abstract
A 3-D model of multichip module (MCM) is built with ANSYS and the temperature field distribution is studied. A regression equation describing the relationship of structure parameters and material properties with the maximum chip junction temperature of MCM is made, which integrates the response surface methodology and ANSYS. Quantitative analysis of the effect of four design parameters on the maximum chip junction temperature of MCM is studied. The four design parameters are the thickness of the substrate, thermal conductivity of the substrate, thermal conductivity of the thermal grease, and convection heat transfer coefficient, respectively. The accuracy and validity of the regression equation are validated by simulation with ANSYS. In addition, the maximum error between the calculation value of the regression equation and the simulation value with ANSYS is 0.541°C. With the regression equation, the thermal optimization design results of the four parameters are Ktg = 5 W/m°C, δ = 2.5 mm, Ks = 290 W/m°C, and h = 55 W/m2°C, which lead to the maximum chip junction temperature Tjmax = 89.172°C as the minimum value.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Components, Packaging and Manufacturing Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
