Abstract

ABSTRACTWe have developed a simpler and more reliable method of thermoelectric effect spectroscopy (TEES) by eliminating the second heater in the technique. We have applied this method to the deep level studies in semi-insulating(SI) GaAs epitaxial layers grown at a low temperature by molecular beam epitaxy (LT-GaAs) and SI-undoped GaAs, Cr-doped GaAs. We have found that the electrical contacts on front and back surfaces of the sample are more reliable for the TEES measurement than both contacts made on the same surface. In this contact arrangement, the temperature difference of about 1–2K between the back and front surfaces was enough to produce a clear and reliable TEES data, without the need for a second heater. The results obtained by TEES are consistent with the results obtained by photo-induced current transient spectroscopy (PICTS) and by thermally stimulated current (TSC) measurements. The TEES results clearly distinguish between the electron traps and the hole traps. We will discuss the results on the various semi-insulating GaAs samples and the advantages and limitations of the TEES technique.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.