Abstract
In current German and international standards for composite structures of steel and concrete, the determination of the ultimate load capacity and the fatigue life of headed shear studs is carried out with separate and independent verifications at the ultimate, serviceability and fatigue limit states. The fatigue resistance is verified in a similar way to steel structures, based on a nominal stresses concept and linear damage accumulation according to Palmgren-Miner. The effect of pre-damage due to fatigue loading at both the ultimate and serviceability limit states is not considered. Because cyclic loading of headed shear studs leads to a decrease in the static strength of stud connectors, the assumptions for independent limit states are not given and the reliability index of steel-concrete composite structures subjected to fatigue loading may fall below the target values in codes. This paper deals with the results of a comprehensive programme of experimental work with more than 90 standard EC4 push-out test specimens and two full-scale beam tests which consider the crack propagation through the stud foot and the local damage to the concrete surrounding the studs as relevant consequences of highcycle loading. Based on the results of the push-out tests, new design methods were developed to predict the fatigue life and the residual strength of headed shear studs after high-cycle loading. Considering the interaction between the local damage and the behaviour of the global structure, these research results were taken as the basis for simulating the cyclic behaviour of composite beams by means of a damage accumulation method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.