Structure‐borne sound design of typical hull base and underwater model test

Abstract

PurposeThe structure‐borne sound generated by power equipment can be isolated effectively through vibration absorber under hull base structures. The practical vibration isolation performance is limited due to the weight, size and cost. The dramatic attenuating wave propagation characteristic of hull base without adding weight is essential to the vessel acoustic stealth.Design/methodology/approachThe characteristics of vibration wave propagated from typical shape base link structures have been investigated according to impedance mismatch and wave conversion in non‐homogeneous structure. The hull base is simplified to three degrees of freedom damped system through the mechanical impedance method. The influence of blocking mass weight, as well as location properties to the base vibration isolation performance have been discussed. Furthermore, the structure‐borne sound design of a typical hull base is carried out.FindingsThe impedance mismatch of the hull base is further increased by the comprehensive use of high transmission loss base link structures, blocking mass as well as damping layer. The effectiveness of structure‐borne sound design is verified through numerical calculation together with underwater model test. The test data show that the noise has been reduced larger than 3 dB.Originality/valueThe paper describes what is believed to be the first application of the high transmission loss base in hull structures based on the literature survey. The method of structure‐borne sound design of a typical hull base can be applied in different types of vessels.