Structural performance of steel reinforced concrete L-shaped columns in high temperature

Abstract

This paper presented structural performance of steel reinforced concrete (SRC) L-shaped columns under high temperature and axial load coupling effects. Considering the influence of the axial load ratio (0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8), eccentricity (25, 50, 75 and 100 mm), concrete strength (40, 50, 60 and 70 MPa), calculation length (500, 1000, 1500 and 2000 mm), the SRC L-shaped columns were tested and analyzed in high temperature conditions. The results demonstrated that: (1) Concrete surface of all specimens was grayish white with many cracks. With the increasing axial load ratio, the number of cracks decreased and crack width increased. (2) The fire resistance decreased by 1.3–15.1 %, 6.1–14.9 %, and 3.8–7.1 % respectively, with increasing axial load ratio, eccentricity, calculation length; the fire resistance increased by 0.7–5.3 % with increasing concrete strength. (3) Axial displacement trend first increased gradually because of the thermal expansion of concrete, and decreased gradually after reaching the maximum axial expansion deformation. With increasing axial load ratio, the maximum axial expansion deformation decreased by 42.4–60.2 %, the time of displacement to reach the maximum expansion deformation decreased by 29.7–57.0 %, and the time of displacement to reach 0 mm decreased by 272.7–366.2 %. Finally, the calculation method for displacement and maximum bearing capacity in high temperature was proposed according to principle of virtual work, which served as a guide for fire evaluation of SRC L-shaped columns.