Abstract
Complex nanodispersed systems with multi-walled carbon nanotubes and nanodispersed silica have a significant impact on the processes of hydration, hardening and strength gain of construction composites predetermining their durability. While using a scanning electron microscope with an attachment for X-ray microanalysis and a device for infrared spectral analysis investigations have shown that the main effect of the cement matrix modification in the case of adding complex nanodispersed systems is provided by direct influence of hydration processes with subsequent crystallization of new formations. It has been noted that while adding carbon nanotube dispersion and nanosized silica a binding matrix is structured in the form of an extremely dense shell from crystalline hydrate new formations on the surface of solid phases that provides strong binding matrix in cement concrete. The addition effect of carbon nanotubes has been analyzed and quantitatively assessed through an investigation for every case of one sample with nanotubes and one sample without them with the help of a nanoindenter and scanning electron microscope. It is necessary to solve rather complicated challenging task in order to assess quantitatively the addition effect of CNT on material characteristics at a micromechanical level. At the same time it is possible to investigate surface of a concrete sample with one-micron resolution. In this case it is necessary to prepare samples for nanoindentation with exclusion of all CNT defectable effects that have been shown by a SEM. So in this case more adequate method for assessment must be a picoindenter , which combines a test method for nanoindentation with an optical SEM potential. Such equipment is in the stage of in-situ testing process at the Vienna University of Technology. The investigation is based on the fact that the main modification effect of mineral binding matrix while using incorporated complex nanodispersed systems and nanosilica is ensured by a direct influence of hydration processes and subsequent crystallization of new formations. Scanning electron microscopy and X-ray microanalysis with detection in IR spectra have revealed that adding of multi-walled carbon nanotubes dispersion together with nanodispersed silica provides structuring of rather dense shell of hydrated new formations along cement matrix on the surface of solid phase. The structured interfacial layers form separate cells in the modified cement matrix that ensures a formation of extremely filled system and predetermines structural strengthening of the modified cement matrix due to formation of spatial packaging. Consequently, the main factor increasing characteristics of cement concrete which is modified with carbon nanotubes and nanosilica is a structural modification of calcium hydrosilicates with relation to composition and morphology of new formations.
Highlights
Carbon nanotubes (CNT) were first synthesized in 1952 by the members of Institute of Physical chemistry and Electrochemistry of Russian Academy of Sciences, L
While using a scanning electron microscope with an attachment for X-ray microanalysis and a device for infrared spectral analysis investigations have shown that the main effect of the cement matrix modification in the case of adding complex nanodispersed systems is provided by direct influence of hydration processes with subsequent crystallization of new formations
To check the actual influence of the CNTs on the characteristics of the concrete, samples а without CNTs and with CNTs were subjects to several series of experiments performed at the Institute for Mechanics of Materials and Structures at Vienna University of Technology: They were examined by the help of a nanoindenter and with a scanning electron microscope (SEM)
Summary
Carbon nanotubes (CNT) were first synthesized in 1952 The main properties of CNT were systematically described by Sumio Iijima who discovered them in 1991 as a by-product of fullerene synthesis [2]. The authors of the given study have synthesized carbon nanotubes using an original technology presented in patent [3] the technique of which is described in article [4]. The produced nanostructures were used to modify the structure of non-autoclaved cellular concrete. Further studies [6, 7] found that adding CNT changes the structure and the composition of calcium hydrosilicates (CHS) that form the main values of the properties of dense cement concrete
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
