Abstract
In order to investigate the effectiveness of laser quenching for ceramic coated steels, 2 kinds of ceramic coated specimens of CrAlN and TiAlN were prepared, and the laser quenching experiments under various irradiation conditions were carried out. The influence of laser irradiation on the substrate hardness, film hardness and adhesive strength were investigated. Because of the high heat absorption of CrAlN and TiAlN films when compared to TiN, it was possible to quench the substrate effectively without any absorbent material for these specimens, although an absorbent was required for TiN coated specimen. The quenched area on the cross section of the substrate of CrAlN coated specimen was larger than that of TiAlN coated specimen. The difference of the quenched area could be explained by the difference of the heat absorption of these films. It was also possible to improve the adhesive strength of these films by laser irradiation. Although the film hardness decreased considerably by furnace quenching for ceramic coated steels, film hardness did not decrease by laser irradiation. It was concluded that the improvement of the adhesive strength and substrate hardness without the decrease of film hardness was achieved by laser quenching for CrAlN and TiAlN coated specimens.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.