Abstract
Ultimate tensile strength (UTS) becomes a primary concern in direct recycling of metal chips. This study investigates the influences of preheating temperature, preheating time and volume fraction of alumina on the tensile strength performance. The parameters of temperature, time and volume fraction of micro alumina were varied between 450 - 550 oC, 1 - 3 hours and 5 - 15% respectively. The full factorial design with center point analysis was employed to analyse the effect of process variables on the response. A total of 19 experimental runs were performed through the hot extrusion operation. The preheating temperature and volume fraction were identified as the key variables affecting the UTS. An optimum UTS was obtained for the profile extruded at 550 oC, 3 hours duration and 5% volume fraction of alumina.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
