Abstract
We demonstrate strain-induced modulation of perpendicular magnetic anisotropy (PMA) in (001)-oriented [Pb(Mg1/3Nb2/3)O3](1−x)-[PbTiO3]x (PMN-PT) substrate/Ta/CoFeB/MgO/Ta structures using ferromagnetic resonance (FMR). An in-plane biaxial strain is produced by applying voltage between the two surfaces of the PMN-PT substrate, and is transferred to the ferromagnetic CoFeB layer, which results in tuning of the PMA of the CoFeB layer. The strain-induced change in PMA is quantitatively extracted from the experimental FMR spectra. It is shown that both first and second-order anisotropy terms are affected by the electric field, and that they have opposite voltage dependencies. A very large value of the voltage-induced perpendicular magnetic anisotropy modulation of ∼7000 fJ/V·m is obtained through this strain-mediated coupling. Using this FMR technique, the magnetostriction coefficient λ is extracted for the ultrathin 1.1 nm Co20Fe60B20 layer, and is found to be 3.7 × 10−5, which is approximately 4 times larger than the previously reported values for CoFeB films thicker than 5 nm. In addition, the effect of strain on the effective damping constant (αeff) is also studied and no obvious modulation of the αeff is observed. The results are relevant to the development of CoFeB-MgO magnetic tunnel junctions for memory applications.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
