Standardization the effect of shape of aggregates with respect to compressive strength of concrete

Abstract

It is proved that aggregate’s types have the severe effect on physicomechanical properties of concrete as aggregate covered almost 70 to 80 percent of the total volume of concrete. The effect of Flaky and Elongated aggregates on strength, durability, and workability of concrete has often been qualitatively expressed. The aim of this work is establishing the same quantitatively. M25 grade concrete for different ratios of weights of Elongated to normal aggregate, Flaky to normal aggregate and combined Flaky & Elongated aggregate to normal aggregate was tested for compressive strength at 28 days concrete. Three different types of aggregates were employed in the investigation, namely; normal aggregate, Elongated aggregate, and Flaky aggregate. Density and water absorption also kept constant to identify the effects on properties of concrete only for differences in shape. Thirty-six concrete cylinder was cast at 28 days. Varying dosages of Normal aggregate (60%, 65%, 70%, 75%,80% 85%), flaky aggregate (40%, 35%, 30%, 25%, 20%, 15%), elongated aggregate (40%, 35%, 30%, 25%, 20%, 15%), by mixture volume and length of 12inch (304.8 mm) & diameter of 6inch (152.4 mm) cylinder were used to test. Compaction was done by temping rod. Concrete cylinder was tested at the age of 28 days of curing. This study proposed of mixing three different types of aggregate in concrete. Compressive strength of concrete was measured by the effect of three different shapes of aggregates of varying dosages.