Abstract
Abstract The glass former Fe 83 Zr 3.5 Nb 3.5 B 9 Cu 1 (at.%) alloy was processed by spray forming. The aim was to investigate the possibility of forming novel microstructures using this process. The ratio between the gas mass flow rate and the metal mass flow rate used was 0.23, and nitrogen was used as atomization gas. The resulting deposit, weighting about 0.8 kg, as well as the overspray powder with a median particle diameter about 150 μm, were characterized by using X-ray diffratometry, differential scanning calorimetry and scanning electron microscopy with energy dispersive spectroscopy. Saturation induction ( B s ), maximum permeability ( μ max ) and coercive field ( H c ) were measured. The overspray powder showed a microstructure consisting of amorphous and α-Fe phases. The volume fraction of the amorphous phase decreased as the granulometric size range increased. The deposit presented fully crystalline structure with α-Fe, Fe 3 Nb, Fe 2 Zr and Fe 2 B phases. The formation of amorphous phase in the overspray and its absence in the deposit indicates that the deposit was formed by the impacting of a high volume fraction of fully liquid droplets, providing temperature and time enough for complete crystallization of the deposit.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
