Abstract
A method for the speciation of zinc and copper binding with proteins in human serum was explored by chelating resin (Chelex-100) pre-treatment and inductively coupled plasma mass spectrometry (ICP-MS). It was shown by a SEC (size-exclusion chromatography)-ICP-MS system that albumin-zinc and albumin-copper (loosely-bound species) could be selectively removed from serum by adsorption on the Chelex-100 resin after the chelating resin pre-treatment, while alpha 2-macroglobulin-zinc and ceruloplasmin-copper (firmly-bound species) remained in the serum. The zinc and copper bound with alpha 2-macroglobulin and ceruloplasmin, respectively, were then determined by ICP-MS after batch treatment of the serum samples with the Chelex-100 resin. In addition, the total concentrations of zinc and copper were also determined by ICP-MS after a 20-fold dilution with 0.1 M HNO3. The albumin-zinc and -copper were estimated as the differences between the concentrations of total and firmly-bound species. The present batch pre-treatment method was applied to the speciation analysis of zinc and copper binding with proteins in sera donated from 25 healthy volunteers as well as from a pregnant woman and a myelodysplastic syndrome patient. The observed concentrations of alpha 2-macroglobulin-zinc and ceruloplasmin-copper were in the ranges 109-202 ng ml-1 (12.4-31.3% of total zinc) and 513-880 ng ml-1 (90.6-99.7% of total copper), respectively. The present method is simple (only addition of the chelating resin and centrifugation is required) and reproducible (average RSD = 2% for alpha 2-macroglobulin-zinc and 1% for ceruloplasmin-copper in intra-assay measurements, and 5% for alpha 2-macroglobulin-zinc and 4% for ceruloplasmin-copper in inter-assay measurements), and there is less risk of contamination during separation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.