Abstract

Broadband shock-associated noise is an important component of the overall noise generated by modern airplanes. In this study, sound generated by the weakly nonlinear interaction between linear instability waves and the shock-cell structure in supersonic jets is investigated numerically in order to gain insight into the broadband shock-noise problem. The model formulation decomposes the overall flow into a mean flow, linear instability waves, the shock-cell structure and shock-noise. The mean flow is obtained by solving RANSequations with a k-e model. Locally parallel stability equations are solved for the shock structure, and linear parabolized stability equations are solved for the instability waves. Then, source terms representing the instability wave/shock-cell interaction are assembled and the inhomogeneous linearized Euler equations are solved for the shock-noise.Three cases are considered, a cold under-expanded Mj = 1.22 jet, a hot under-expanded Mj = 1.22 jet, and a cold over-expanded Mj = 1.36 jet.Shock-noise computations are used to identify and understand significant trends in peak sound amplitudes and radiation angles. The peak sound radiation angles are explained well with the Mach wave model of Tam & Tanna J. Sound Vib. Vol. 81, 1982, p. 337). The observed reduction of peak sound amplitudes with frequency correlates well with the corresponding reduction of instability wave growth with frequency. However, in order to account for variation of sound amplitude for different azimuthal modes, the radial structure of the instability waves must be considered in additionto streamwise growth. The effect of heating on the Mj = 1.22 jet is shown to enhance the sound radiated due to the axisymmetric instability waves while the other modesare relatively unaffected. Solutions to a Lilley–Goldstein equation show that soundgenerated by ‘thermodynamic’ source terms is small relative to sound from ‘momentum’ sources though heating does increase the relative importance of the thermodynamic source. Furthermore, heating preferentially amplifies sound associated with the axisymmetric modes owing to constructive interference between sound from the momentumand thermodynamic sources. However, higher modes show destructive interference between these two sources and are relatively unaffected by heating.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.