Abstract

•Sorbent-coated carbon fibers exhibit rapid temperature swing by Joule heating •The DAC system can fully regenerate in under 10 min •Wind-driven DAC modules recover CO2 product from the air at ∼82% purity •The cost of CO2 from this wind-driven DAC system is projected to be ∼$160/tonne Direct air capture (DAC) by electrically driven temperature swing adsorption (ETSA) is an emerging technology due to its simplicity and ease of pairing with renewable electricity energy sources. Herein, we describe the preparation of sorbent-coated carbon fibers via roll-to-roll process that exhibit 400 ppm CO2 adsorption of ∼1.2 mmol gfiber−1. The fibers exhibit Joule heating upon application of a potential, reaching CO2 regeneration temperatures within 1 min. DAC modules show fast electrothermal CO2 desorption with directly applied electric potential, releasing the adsorbed CO2 six times faster than externally driven thermal desorption. The simplicity and modularity of the sorbent-coated carbon fibers and their rapid adsorption/desorption cycling by ETSA have the potential to improve the productivity of DAC systems. A techno-economic analysis of a pilot-scale ETSA-DAC system projects an overall cost of about 160 $ tCO2−1, with convective energy losses to the ambient accounting for only 7% of the Joule heating input during desorption. Direct air capture (DAC) by electrically driven temperature swing adsorption (ETSA) is an emerging technology due to its simplicity and ease of pairing with renewable electricity energy sources. Herein, we describe the preparation of sorbent-coated carbon fibers via roll-to-roll process that exhibit 400 ppm CO2 adsorption of ∼1.2 mmol gfiber−1. The fibers exhibit Joule heating upon application of a potential, reaching CO2 regeneration temperatures within 1 min. DAC modules show fast electrothermal CO2 desorption with directly applied electric potential, releasing the adsorbed CO2 six times faster than externally driven thermal desorption. The simplicity and modularity of the sorbent-coated carbon fibers and their rapid adsorption/desorption cycling by ETSA have the potential to improve the productivity of DAC systems. A techno-economic analysis of a pilot-scale ETSA-DAC system projects an overall cost of about 160 $ tCO2−1, with convective energy losses to the ambient accounting for only 7% of the Joule heating input during desorption.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.