Abstract

AbstractCobalt blue is one of the most chemically and thermally stable blue pigments. However, cobalt is scarce and expensive. To minimize the use of cobalt and reduce production costs and toxicity, cobalt blue core‐shell pigments were synthesized by a solid‐state method, which is cheaper than a liquid‐phase reaction. Small cobalt hydroxide particles and large α‐alumina particles, in various ratios, were used as the starting materials. The dry mixed powders were calcined at 1200°C for 2 hours. Elemental mappings of the surfaces and cross sections of the synthesized particles showed that the cobalt blue had a core‐shell structure. X‐ray diffraction patterns showed that the synthesized cobalt blue consisted of an α‐alumina core and a cobalt aluminate shell. The color tone of the synthesized cobalt blue was evaluated from the lightness (L*) and chroma (C*) values. The color tone of the cobalt blue synthesized in this study was almost same as those of commercially available samples although the cobalt molar fraction was lower than the stoichiometric ratio (Co/(Co + Al) = 0.33, Co/Al = 0.5) which was calculated from the chemical reaction formula.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.