Abstract
In this work, we have explored the feasibility of alveolar open-cell β-SiC foams as catalyst support for solar hydrogen production. For that purpose, Pt and Ru nanoparticles have been obtained, by means of photoassisted synthesis, on TiO2-coated foams and tested in gas-phase hydrogen production from water-ethanol mixtures in a tubular reactor coupled to a compound parabolic solar collector (CPC). Subnanometre-sized metal or metal/oxide nanoparticles are obtained for Pt/TiO2/SiC and Ru/TiO2/SiC foams, respectively, where co-catalyst nanoparticles decorate the TiO2 coating which in turn is attached to the SiC foam through an amorphous SiO2 washcoat formed by SiC pre-calcination. In solar photocatalytic reactions, all of the assayed foam-supported photocatalysts are active for the production of hydrogen, with Pt/TiO2 ones being the most active and foam pore size exerting little influence on hydrogen outcome. In the best conditions, 14 % UV-to-hydrogen (equivalent to 0.49 % solar-to-hydrogen) conversion efficiency, with photonic efficiency higher than 30 %, is attained.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.