Abstract
The microwave-induced decomposition of bis{N,N'-diisopropylacetamidinate}nickel(II) [Ni{MeC(NiPr)2 }2 ] or bis(1,5-cyclooctadiene)nickel(0) [Ni(COD)2 ] in imidazolium-, pyridinium-, or thiophenium-based ionic liquids (ILs) with different anions (tetrafluoroborate, [BF4 ]- , hexafluorophosphate, [PF6 ]- , and bis(trifluoromethylsulfonyl)imide, [NTf2 ]- ) yields small, uniform nickel nanoparticles (Ni NPs), which are stable in the absence of capping ligands (surfactants) for more than eight weeks. The soft, wet-chemical synthesis yields the metastable Ni hexagonal close-packed (hcp) and not the stable Ni face-centered cubic (fcc) phase. The size of the nickel nanoparticles increases with the molecular volume of the used anions from about 5 nm for [BF4 ]- to ≈10 nm for [NTf2 ]- (with 1-alkyl-3-methyl-imidazolium cations). The n-butyl-pyridinium, [BPy]+ , cation ILs reproducibly yield very small nickel nanoparticles of 2(±1) nm average diameter. The Ni NPs were characterized by high-resolution transmission electron microscopy (HR-TEM) and powder X-ray diffraction. An X-ray photoelectron spectroscopic (XPS) analysis shows an increase of the binding energy (EB ) of the electron from the Ni 2p3/2 orbital of the very small 2(±1) nm diameter Ni particles by about 0.3 eV to EB =853.2 eV compared with bulk Ni0 , which is traced to the small cluster size. The Ni nanoparticles show superparamagnetic behavior from 150 K up to room temperature. The saturation magnetization of a Ni (2±1 nm) sample from [BPy][NTf2 ] is 2.08 A m2 kg-1 and of a Ni (10±4 nm) sample from [LMIm][NTf2 ] it is 0.99 A m2 kg-1 , ([LMIm]=1-lauryl-3-methyl- imidazolium). The Ni NPs were active catalysts in IL dispersions for 1-hexene or benzene hydrogenation. Over 90 % conversion was reached under 5 bar H2 in 1 h at 100 °C for 1-hexene and a turnover frequency (TOF) up to 1330 molhexane (molNi )-1 h-1 or in 60 h at 100 °C for benzene hydrogenation and TOF=23 molcyclohexane (molNi )-1 h-1 .
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.