Abstract
Sodium is used as a coolant in primary and secondary heat transport systems of Liquid Metal cooled Fast Breeder Reactors (LMFBR). The Prototype Fast Breeder Reactor (PFBR) is in advanced stage of construction at Kalpakkam, India. Under Sodium Ultra Sonic Scanner (USUSS) is used to image the components dipped in sodium and more specifically the gap between Sub Assembly (SA) heads and the control plug. This is essential to confirm that no SA is protruding from its position. USUSS has to be qualified in sodium before its use in the reactor. After sodium testing, sodium adhering to the USUSS needs to be removed to prevent reaction with oxygen and moisture present in air when it is taken out. The sodium removal process is based on the use of moist carbon-di-oxide (CO2) at a temperature of about 353K. The reaction rate is controlled by varying the ratio of CO2 to moisture. Hydrogen released during the reaction of sodium with moisture is continuously monitored to ensure safe limits of hydrogen concentration. This paper describes the details of the experimental setup used in a cleaning pit for the removal of sodium adhering on USUSS and the technical details of the cleaning process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
