Abstract
New techniques developed using the array transducer, to image and size the bottom-surface and near-through-wall crack-like defects in thick carbon steel components are discussed. Three studies are reported here including (a) Optimal beam steering angle for focused and unfocused inspection using phased array method for bottom-surface crack sizing. (b) A front wall correction algorithm for sizing of near-through-wall crack-like defects. (c) A small aperture technique for sizing of near-through-wall crack-like defects. A Finite Difference Time Domain (FDTD) based simulation was used to study and verify the experimental observations. The application of time domain scheme relative arrival time technique (RATT), to measure the size of the near-through wall crack-like defects for the leak before break (LBB) criterion, was also investigated and found to be insufficient. A conventional SAFT algorithm was used for improving the sizing using the small aperture technique.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
