Abstract

Crossed dipole coils for the wide-range 3-D omnidirectional inductive power transfer (IPT) are proposed. Free positioning of a plane receiving (Rx) coil is obtained for an arbitrary direction within 1m from a plane transmission (Tx) coil. Both the Tx and Rx coils consists of crossed dipole coils with an orthogonal phase difference; hence, a rotating magnetic field is generated from the Tx, which enables the Rx to receive power vertically or horizontally. Thus, the 3-D omnidirectional IPT is first realized for both the plate type Tx and Rx coils, which is crucial for practical applications, where volumetric coil structure is highly prohibited. This optimized configuration of coils has been obtained through a general classification of power transfer and searching for mathematical constraints on multi-D omnidirectional IPT. Conventional loop coils are thoroughly analyzed, and verified to be inadequate for the plate-type omnidirectional IPT in this paper. Simulation-based design of the proposed crossed dipole coils for a uniform magnetic field distribution is provided, and the 3-D omnidirectional IPT is experimentally verified by prototype Rx coils for a wireless power' zone of 1 m <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> with a prototype Tx coil of 1 m <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> at an operating frequency of 280 kHz, meeting the power matters alliance. The maximum overall efficiency was 33.6% when the input power was 100 W.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.