Abstract
Effect of 35BaO–35ZnO–30B2O3 (BZB) addition on the sintering behaviors, phase evolution and microwave dielectric properties of Ti-modified Ba3Ti5Nb6O28 (Ba3Ti5.1Nb5.9O27.95, BTNO) ceramics had been investigated. BZB addition effectively reduced the sintering temperature of BTNO from 1250 °C to about 900 °C. With increasing BZB addition, the crystal phase of the present ceramics changed from single phase Ba3Ti5Nb6O28 to mixing phases of Ba3Ti5Nb6O28 and Ba3Ti4Nb4O21. And the major phase gradually became from Ba3Ti5Nb6O28 to Ba3Ti4Nb4O21. Dielectric constant and temperature coefficient increased with the rising of BZB addition. But the Qf value gradually declined from 28000 to about 6000 GHz. The BTNO ceramics with 15% BZB addition exhibited excellent microwave dielectric properties as following: e = 46.3, Qf = 5887 GHz and τf = 35.5 ppm/°C, which was potential of candidate materials for LTCC application. And the variation of microwave dielectric properties had been also discussed with the phase and microstructure evolution.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Materials Science: Materials in Electronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
