Abstract
AbstractMulti‐layer plastic films are widely used in various fields especially for packaging, but due to complex composition, it is very difficult to recover single‐material polymers or high‐purity monomers from them after usage. In this study, we proposed a hydrothermal process for recycling PET/PE (PET: Polyethylene terephthalate; PE: Polyethylene) films. PET can be hydrolyzed to monomers of terephthalic acid (TPA) and ethylene glycol (EG). Using a hydrothermal system equipped with two filters, PE, TPA, and EG were collected separately, indicating the simultaneous material and chemical recycling of PET/PE films was firstly achieved. At 300 °C and 10 MPa for 60 min, PET conversion reached around 100 %, and TPA yield of 83.0 % was obtained with a high TPA purity of 96.1 %. In addition, the effect of the holding time on PET conversion, TPA yield, EG yield, and TPA purity was studied. This research opened up a new and sustainable pathway to recycle multi‐layer plastic films in both lab and industry.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
