Simulations of Multi-Phase Particle Deposition on Endwall Film-Cooling

Abstract

Demand for clean energy has increased motivation to design gas turbines capable of burning alternative fuels such as coal derived synthesis gas (syngas). One challenge associated with burning coal derived syngas is that trace amounts of particulate matter in the fuel and air can deposit on turbine hardware reducing the effectiveness of film cooling. For the current study, a method was developed to dynamically simulate multi-phase particle deposition through injection of a low melting temperature wax. The method was developed so the effects of deposition on endwall film cooling could be quantified using a large scale vane cascade in a low speed wind tunnel. A microcrystalline wax was injected into the mainstream flow using atomizing spray nozzles to simulate both solid and molten particulate matter in a turbine gas path. Infrared thermography was used to quantify cooling effectiveness with and without deposition at various locations on a film cooled endwall. Measured results indicated reductions in adiabatic effectiveness by as much as 30% whereby the reduction was highly dependent upon the location of the film-cooling holes relative to the vane.