Simulating debris flow deposition using a two-dimensional finite model and Soil Conservation Service-curve number approach for Hanlin gully of southern Gansu (China)

Abstract

Evaluating the flood discharge and deposition process of a debris flow is important for risk assessment, management, and design of possible supporting works for geo-hazard mitigation. The movement and deposition process of a typical debris flow gully in southern Gansu province, China, was simulated using the Soil Conservation Service-curve number (SCS-CN) approach and a two-dimensional finite model (FLO-2D PRO model) coupled with geographic information systems. Runoff volumes and depths were obtained by the use of the SCS-CN model using different precipitations and different intervals. The deposition, velocity, impact force, and influence zone of the debris flow were simulated with the FLO-2D PRO model based on the results of the SCS-CN method. Simulation results for a storm that occurred on 12 October 2010 suggest a maximum flow velocity of 23.1 m/s, a maximum deposition depth of 27.9 m, and a hazard zone of about 0.414 km2. These results were consistent with measured results from the documented debris flow. Verification demonstrated that model results could be used to help predict disaster-causing debris flows, thus helping to protect the lives, property, and economy of the local population.