Abstract
The fabrication and characterization of a fiber-optic micro accelerometer for downhole seismic measurement is described. This sensor consists of a Fabry-Perot interferometer using a half-mirror at the end of an optical fiber and a total reflection mirror on a silicon mass suspended with thin beams. When acceleration is applied to the sensor, the intensity of the reflected light is modulated interferometrically according to the displacement of the silicon mass.The sensor is fabricated by using silicon micromachining and hence is small sized (6.6mm in diameter and 11mm in height) and cost effective. By reason of the small size and the low cost, it is possible to install many sensors in a micro borehole. Since the sensor has not active devices like transistors, it can stand in harsh environment i.e. high temperature. The fabricated sensor has the frequency range from DC to 300Hz, the maximum detectable acceleration of 0.27g and the dynamic range of 36dB.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
