Abstract
The aim of this study is to develop a newly silane sol–gel pretreatment on the barrier properties and filiform corrosion resistance of 6016 aluminium alloy covered by cataphoretic coating. The sol–gel coatings are used as coupling agent between aluminium substrate and cataphoretic paint. The pretreatment is an aqueous solution of three different silane compounds (glycidyloxypropyltrimethoxysilane (GPS), tetraethoxysilane (TEOS) and methyltriethoxysilane (MTES)) hydrolysed at two different pH (2 and 3.5). A system without pretreatment was studied as reference. The electrocoatings were cured between 155°C and 195°C in order to modify their mechanical properties.Polarisation curves, EIS and FT-IR measurements were used in order to characterize the silane layers. EIS measurements were used to follow the barrier properties and the water uptake evolution on intact coatings.The filiform corrosion protection of the coating was also evaluated by a normalized filiform corrosion test.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
