Significance of Face Velocity Fluctuation in Relation to Laboratory Fume Hood Performance

Abstract

In order to recognize the problems associated with the transport mechanism of containment during the ventilation process of a laboratory fume hood, a transparent, full scale chemical fume hood is constructed for experimental studies. Distributions of mean velocity and velocity fluctuation in the sash plane are measured using a thermal anemometer. Flow patterns and tracer-gas concentration leakages are respectively diagnosed via the laser-assisted flow visualization method and the EN 14175-3 test protocol. The magnitudes of measured velocity fluctuations exhibit a sharp peak along the perimeter of the sash opening. The results of flow visualization verify that the elevated turbulence fluctuations are induced by the boundary-layer separation when the flow passes over the edges of sash perimeter. The tracer gas experiment shows that the regions where high degree containment leakages detected are located along the perimeter of hood aperture. Eleven commercial hoods which are claimed with fine aerodynamic design are further tested for confirmation of these observations. The results show similar correlations. Conclusions thus are made that large-scale vortex structures occurring around the perimeters of hood aperture due to the boundary-layer separation could induce strong turbulence, and therefore enhance dispersion of the hood containment.