Abstract
Herein, the prospects of detecting peritectic behavior in carbon steels (Fe–C) using solidified shell thickness measurements and real‐time mold thermal maps are investigated. Irregular steel shell thickness and localized shell thinning are negative conditions associated with the peritectic transformation in many steel grades. Detailed three dimensional (3D) thickness maps are generated to directly contrast peritectic from nonperitectic solidification features using a laboratory dip test. Characterization of the steel shell also includes measurement of 3D shell surface deviations from a nominally flat surface. The unevenness parameter, which is calculated using the coefficient of variation in shell thickness as a function of the carbon content in the steel, clearly peaks around 0.14%C. A distributed fiber‐optic sensor, embedded 1 mm from the working face of a 100 × 55 × 12 mm3 thick copper chill block, has been used to obtain real‐time mold thermal maps of the solidification event during immersion of the block into molten steel. A programmable drive is used to control the motion of the chill block during immersion into a steel bath to minimize variability in immersion speed, position, and time. The thermal mapping measurements are well correlated with the shell profile measurements.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
