Abstract
Probabilistic design, such as reliability-based design and robust design, offers tools for making reliable decisions with the consideration of uncertainty associated with design variables/parameters and simulation models. Since a probabilistic optimization often involves a double-loop procedure for the overall optimization and iterative probabilistic assessment, the computational demand is extremely high. In this paper, the sequential optimization and reliability assessment (SORA) is developed to improve the efficiency of probabilistic optimization. The SORA method employs a single-loop strategy with a serial of cycles of deterministic optimization and reliability assessment. In each cycle, optimization and reliability assessment are decoupled from each other; the reliability assessment is only conducted after the deterministic optimization to verify constraint feasibility under uncertainty. The key to the proposed method is to shift the boundaries of violated constraints (with low reliability) to the feasible direction based on the reliability information obtained in the previous cycle. The design is quickly improved from cycle to cycle and the computational efficiency is improved significantly. Two engineering applications, the reliability-based design for vehicle crashworthiness of side impact and the integrated reliability and robust design of a speed reducer, are presented to demonstrate the effectiveness of the SORA method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.