Abstract
We performed a simultaneous survey of self-potential and plume turbidity using an autonomous underwater vehicle (AUV) above the Sunrise deposit in the Myojin Knoll caldera of the Izu-Ogasawara arc. A 10-m-long electrode rod, on which five electrodes referenced with a common electrode were mounted, was connected at the tail of an AUV. The survey was conducted at a typical speed of 2 knots, covering the 1500 m × 1500 m area with a typical spacing of survey lines of 100 m. With AUV altitude of 100 m above the seafloor, a negative self-potential anomaly of a few millivolts was observed. The self-potential anomaly was found to spread 300 m × 300 m. The self-potential is probably attributable to the geo-battery mechanism: electric current is generated by redox reactions occurring around an ore body crossing a redox contrast. Assuming that the source of the self-potential is an electric current dipole, we can image a southward-dipping dipole with the moment of approximately 103 A m, approx. 30 m below the southern part of the ore deposit. Anomalies of turbidity, which are correlated to ambient temperature and which are signatures of discharged hydrothermal fluids, were distributed more broadly than the self-potential. Some turbidity anomalies were found without self-potential anomalies. They were probably transported by the ocean current. Spatial decoupling between the self-potential and turbidity anomalies suggests that the direct contribution of hydrothermal fluids to the self-potential anomalies is probably a secondary effect. The survey altitude of 100 m and the survey speed of 2 knots in the present study represent practical limitations for the self-potential survey when active hydrothermal fields are targeted. We have observed that the self-potential method responds exclusively to the presence of hydrothermal ore deposits. This behavior differs from other methods for exploring seafloor hydrothermal ore deposits: The geomagnetic method responds not only to ore deposits but also to volcanic bodies. The plume method can detect remote hydrothermal activities, but the source locations are not necessarily specified. The self-potential method is useful as an excellent exploration tool, particularly for initial surveys.
Highlights
For the exploration of submarine hydrothermal ore deposits over wide areas, efficiency is crucially important (e.g., Yoerger et al 2007)
Using a deep-towed array, we have demonstrated that the self-potential method, which measures in situ electrostatic potential (e.g., Jouniaux and Ishido 2012; Revil and Jardani 2013), works effectively to locate seafloor hydrothermal ore deposits (Kawada and Kasaya 2017)
The self-potential method is efficient in marine environments because towing two or more non-polarized electrodes reveals in situ electrostatic fields
Summary
For the exploration of submarine hydrothermal ore deposits over wide areas, efficiency is crucially important (e.g., Yoerger et al 2007). Using a deep-towed array, we have demonstrated that the self-potential method, which measures in situ electrostatic potential (e.g., Jouniaux and Ishido 2012; Revil and Jardani 2013), works effectively to locate seafloor hydrothermal ore deposits (Kawada and Kasaya 2017). The self-potential method is efficient in marine environments because towing two or more non-polarized electrodes reveals in situ electrostatic fields This method is not used very commonly in marine environments at present, it has been investigated continually since the 1970s (e.g., Beltenev et al 2009; Brewitt-Taylor 1975; Cherkashev et al 2013; Constable et al 2018; Corwin 1976; Francis 1985; Heinson et al 1999, 2005; Kawada and Kasaya 2017; Petersen and Shipboard Scientific Party 2016; Safipour et al 2017; Von Herzen et al 1996). The main purpose of the present study is to map the difference in response between self-potential and turbidity using this high efficiency
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
