Abstract
This study suggests the use of a seismic source of a rock drill as a new excitation method for real-time monitoring of the vibration frequency of rock masses in tunnel engineering. In this study, a laboratory rock drill seismic source test system was developed. The rock mass excitation and vibration response under real in situ stress were simulated, and a natural frequency test of different lithologic materials under various in situ stresses was carried out based on the developed system. Empirical equations for estimating natural frequency were established using regression analysis. The test results show that (1) the laboratory rock drill seismic source test system exhibits good performance and can simulate the horizontal excitation process of the tunnel rock drill. Rock drill excitation may be used as the seismic source to continuously measure the in-situ vibration information of the rock mass. (2) The natural frequency of rock is positively correlated with rock elastic modulus and geostress and negatively correlated with rock density. This is not directly related to the seismic source.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
