Abstract
Silicones can contain oligomers known as siloxanes, which are either by-products of the polymerization process or arise from chemical reactions during processing. They may also have both intentionally and non-intentionally added substances, making it crucial to verify that silicone molds are safe and appropriate for food use. In this study 44 silicone molds available in the market from different European countries were studied. Triple sequential migration assays at 100 ºC for 8 h each using food simulants (3 % acetic acid, 20 % ethanol, and 50 % ethanol) were conducted. Some samples were also tested 4 h at 100 ºC. Global migration assessments were only conducted on turbid samples, while qualitative and quantitative analyses of volatile compounds were performed using solid phase microextraction-gas chromatography-mass spectrometry (SPME-GC-MS) in total immersion mode. During the screening analysis of samples of 50 % ethanol at 100 ºC for 8 h a total of 112 different volatile compounds were tentatively identified by MS spectra and quantitatively estimated (LODs = 0.00005–0.014 mg/kg). However, there was no observable migration in the case of 3 % acetic acid and 20 % ethanol. All samples comply with the legislation (Royal Decree 847/2011) in the case of siloxanes. Some samples exceeded specific migration limits for volatile compounds other than siloxanes after third migration in 50 % EtOH at 100 ºC for 8 h.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
