Abstract
In this study, a large-scale roll-to-roll initiated chemical vapor deposition (iCVD) system was developed to allow for coating superhydrophobic thin films on flexible substrates. Poly(hexafluorobutyl acrylate), which possesses a short fluorinated side-chain, was chosen as the hydrophobic finish material, while a commercial porous bamboo fabric was used as the flexible substrate. After iCVD coating, bamboo surface, which is superhydrophilic by its nature, transformed into a superhydrophobic with a water contact angle of 156° without changing its porous and flexible structure. Similar hydrophobic properties were observed against various daily liquids. Complete coverage of as-deposited films on both sides of bamboo surfaces was observed at very high roll speeds up to 225 mm/min, which allow coatings on 20 m2 flexible substrates in a single run. Large scale contact angle and chemical uniformity of coatings on fabric surfaces were evaluated using contact angle and XPS analyses.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.