Role of TiC on the microstructure, tensile property and thermal stability of laser powder bed fusion fabricated AlSi10Mg alloy

Abstract

The incorporation of ceramic particles is frequently employed to enhance the printability of high-strength aluminum (Al) alloys in laser powder bed fusion (L-PBF). However, their influence on the long-term thermal stability and elevated temperature mechanical properties of the Al alloy is seldom studied. This study aims to address this gap by investigating the role of micron-sized TiC particles in the microstructure, long-term thermal stability, and elevated temperature tensile properties of an L-PBF-fabricated AlSi10Mg alloy. The results indicate that highly dense TiC/AlSi10Mg samples can be fabricated, featuring fine equiaxed grains rather than the coarse columnar grains typically formed in the AlSi10Mg alloy. This columnar-to-equiaxed transition is attributed to the residual TiC and the in-situ formation of Al3Ti particles, which act as nucleating agents. Moreover, the incorporation of TiC significantly enhances the long-term thermal stability of the AlSi10Mg alloy by improving the stability of the eutectic network and retarding the coarsening of Si particles by inhibiting Si diffusion. Compared to the AlSi10Mg counterpart, the TiC/AlSi10Mg composite exhibits a higher hardness retention ratio (56 % versus 45 %) after thermal exposure at 400 °C for 192 h. The residual TiC and in-situ formed Al3Ti have high thermal stability and can impede dislocation motion, thereby contributing to enhanced long-term thermal stability. This study offers insights into the design of L-PBF ceramic-reinforced Al alloys with improved thermal stability for high-temperature applications.