Abstract
Irradiation-induced fuel microstructural evolution of the sub-divided grain structure, or rim structure, of large-grained UO 2 pellets has been examined through detailed PIEs. Besides standard grain size pellets with a grain size range of 9–12 μm, two types of undoped and alumino-silicate doped large-grained pellets with a range of 37–63 μm were irradiated in the Halden heavy water reactor up to a cross-sectional pellet average burnup of 86 GWd/t. The effect of grain size on the rim structure formation was quantitatively evaluated in terms of the average Xe depression in the pellet outside region measured by EPMA, based on its lower sensitivity for Xe enclosed in the coarsened rim bubbles. The Xe depression in the high burnup pellets above 60 GWd/t was proportional to d −0.5– d −1.0 ( d: grain size), and the two types of large-grained pellets showed remarkable resistance to the rim structure formation. A high density of dislocations preferentially decorated the as-fabricated grain boundaries and the sub-divided grain structure was localized there. These observations were consistent with our proposed formation mechanism of rim structure, in which tangled dislocation networks are organized into the nuclei for recrystallized or sub-divided grains. In addition to higher resistance to the microstructure change, the large-grained pellets showed a smaller swelling rate at higher burnups and a lower fission gas release during base irradiation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.