Ridge filter design for a particle therapy line

Abstract

The beam irradiation system for particle therapy can use a passive or an active beam irradiation method. In the case of an active beam irradiation, using a ridge filter would be appropriate to generate a spread-out Bragg peak (SOBP) through a large scanning area. For this study, a ridge filter was designed as an energy modulation device for a prototype active scanning system at MC-50 in Korea Institute of Radiological And Medical Science (KIRAMS). The ridge filter was designed to create a 10 mm of SOBP for a 45-MeV proton beam. To reduce the distal penumbra and the initial dose, [DM] determined the weighting factor for Bragg Peak by applying an in-house iteration code and the Minuit Fit package of Root. A single ridge bar shape and its corresponding thickness were obtained through 21 weighting factors. Also, a ridge filter was fabricated to cover a large scanning area (300 × 300 mm2) by Polymethyl Methacrylate (PMMA). The fabricated ridge filter was tested at the prototype active beamline of MC-50. The SOBP and the incident beam distribution were obtained by using HD-810 GaF chromatic film placed at a right triangle to the PMMA block. The depth dose profile for the SOBP can be obtained precisely by using the flat field correction and measuring the 2-dimensional distribution of the incoming beam. After the flat field correction is used, the experimental results show that the SOBP region matches with design requirement well, with 0.62% uniformity.